Bottle Jack (2-Ton)

The MVP SuperLift B-002NCWM is a 2-ton (4,000 lb / ~1.8 metric ton) capacity hydraulic bottle jack engineered for reliable vertical lifting in garage, workshop, roadside, and light service environments. It features a precision hydraulic pump with a patented bypass device that protects against over-pumping and ram over-travel. The cleated (grooved) steel lifting saddle provides secure load contact, while the adjustable extension screw accommodates varying work heights. Critical stress areas are heat-treated for durability and long service life. The unit meets or exceeds applicable ANSI/PALD (or equivalent) standards for hydraulic bottle jacks. It is suitable for lifting but not supporting loads and is not intended for use in lifting or positioning construction trailers, houses, or building structures. Designed for vertical operation only. Key operating notes: Close the release valve (clockwise) and pump the handle to raise. Open the release valve (counterclockwise, no more than ~½ turn) to lower. Maintain proper hydraulic fluid level (typically ~100–101 mL of appropriate hydraulic oil; do not use brake fluid). Annual fluid change and inspection recommended. Always use on a hard, level surface and at manufacturer-specified lift points. Never work under a load supported only by the jack. Feature List Rated capacity: 2 ton / 4,000 lb (~1.815 metric ton) Lifting range: Approximately 7.2 in (183 mm) minimum height to 13.7 in (348 mm) maximum height Ram stroke / lift travel: ~6.5 in (165 mm) Extension screw adjustment: ~2 in (50 mm) Base dimensions: Approximately 3.7 × 3.6 in (95 × 92 mm) Net weight: ~5.7 lb (2.6 kg) Handle length: ~13.4 in (340 mm) two-piece or removable handle Oil capacity: ~100–101 mL Saddle: Cleated/grooved steel for improved load gripping Safety features: Patented bypass device (prevents over-pumping/over-travel); heat-treated critical stress areas Standards: Meets or exceeds ANSI/PALD (or equivalent) requirements Use: Vertical lifting only (auto, truck, farm, shop). Lift only—do not use as a stand. Immediately support with rated jack stands Temperature range: Approximately −20 °C to 50 °C Construction: Steel body with durable finish (typically red with yellow warning label on MVP SuperLift versions) Included: Handle assembly; oil filler plug; carry features on some variants